카테고리 보관물: CHROMA

for Chroma Filter

Optical filters for Astronomy

천문학 응용 분야에서 사용되는 광학 필터에 대한 카다로그 – 다운로드

천체 사진 촬영은 분광 이미징을 사용하여 분자 구성, 이온화 상태, 적색편이, 온도 등 천체의 다양한 특성을 측정합니다.

크로마 테크놀로지에서는 이온화된 황, 산소, H-알파 또는 H-베타 및 기타 요소를 감지하기 위한 최고 품질의 협대역 스펙트럼 라인 필터를 제조합니다.

저희 필터는 최고의 유리 단일 기판을 사용하여 내구성이 매우 뛰어나고 스퍼터링된 하드 코팅을 제공하여 라미네이션이 필요하지 않습니다.

이 코팅은 습도 변화 및 극한 온도 변화에도 견딜 수 있으며, 중심 파장(CWL) 및 대역 통과에 있어서 스펙트럼 정확도를 유지합니다. 모든 1차 필터 코팅은 전면에, 반사 방지 코팅은 후면에 적용하여 고스팅 현상을 방지하고, 투과율을 극대화합니다.

27101 LRGB filter set


27102 HaLRGB filter set


27103 Bessell UBVRI filter set


27104 Sloan ugriz filter set


27105 Classic UBVRI Set filter set


27106 SII Ha OIII -3nm filter set


27107 SII Ha OIII -5nm


27108 SII Ha OIII -3nm -F/3 filter set

27109 Ha3LRGB filter set

27110 Ha5LRGB filter set

Fluorescence Filter Cube

형광현미경에서 형광 필터 큐브의 위치

 형광 관찰용  필터 큐브의 기능 설명

Excitation filter
  • 광원(Light source)에서 발생하는 빛에서 샘플을 자극하고자 하는 파장대역의 빛(光) 만을 투과
Dichroic Mirror
  • Beam splitter라고도 불리며,  Excitation filter를 투과한 빛을 반사시키고, 자극광에 의해 샘플에서 발현된 형광을 투과시키는 역할을 합니다.
Emission filter
  • Dichroic mirror는 샘플에 반사된 자극광을 100% 반사시키지 못하기 때문에 자극광의 일부는 투과하게 됩니다.  이러한 자극광을 한번 더 차단하고, 관찰자가 보고자하는 파장 대역(형광)만을 투과시키는 역할을 합니다.
기본 형광 필터 세트              – Best Selling Product –
Standard Fluorescence Filter Cube Set for Microscope
Standard Fluorescence Filter Cube Set, Band Pass type
JNO-U(B),   JNO-B(B),   JNO-G(B) – Made by JNOPTIC
Chroma Filter Model No. 39000, 39002, 39004

기본 형광 필터 세트의 세부정보는 제품의 모델명을 클릭하시면 확인하실수 있습니다.

 기본 형광 필터로 대응이 되지 않는 경우

형광시약목록(Fluorochrome List)  페이지를 클릭하시면  형광 염색용 시약의 목록이 나옵니다. 여기에서 원하시는 시약명을 클릭하시면 세부정보 및  사용 가능한 필터 세트의 모델명을 찾으실 수 있습니다.

확인이 어려우신 내용이 있으실 경우에는 하기의 연락처로 연락을 주시면 감사하겠습니다.

  • 전 화 : 02-3473-4188 ~ 9
  • E – mail : jhjin@jnoptic.com
  • 작 성 자 : 진재환 ( J. H. JIN )

CoolLED_Filter Table

Fliter Table for CoolLED illuminations.

Single Band SetspE-300 SeriespE-4000pE-340fura
DAPI39000 SB (UV@365)385 (Ch.A)4902849028
DAPI49028 MB (UV@400)
CFP49013435 (Ch.A)4900149013
GFP/FITCS49002460 (Ch.B)4900249002
YFP49023500 (Ch.C)4900349023
TRITC/Cy349004550 (Ch.C)4900449004
TxRed/mCherry49008550 (Ch.C)4900849008
Cy549006635 (Ch.D)4900949006
Cy7/IrDye800N/A740 (Ch.D)49007N/A
Full Multi Band SetspE-300 SeriespE-4000pE-340fura
DAPI/FITC/TRITC69013v2385/470/550
(Ch.A.B.C)
69013v269013v2****
DAPI/FITC/TxRED69013v2385/490/580
(Ch.A.B.C)
69015**69013v2****
DAPI/FITC/TRITC/Cy589402*385/460/550/635
(Ch.A.B.C.D)
8940289402****
GFP/mCherry59022460/550(Ch.B.C)5902259022*****
CFP/YFP59017***435/500(Ch.A.B)5901759017***
CFP/YFP/mCherry69008***435/500/580
(Ch.A.B.C)
6900869008*****
CFP/YFP/RFP/Cy7N/AN/A89403N/A
Pinkel SetspE-300ultra MB(UV@400)pE-4000pE-340fura
ChromaLEDChromaChroma
FURA-2N/AN/AN/A79001
FURA-2/GFPN/AN/AN/A79004
FURA-2/TRITCN/AN/AN/A79003
DAPI/FITC/TRITC69302405/470/580
(Ch.A.B.C)
69302N/A
DAPI/FITC/TxRED69302405/470/580
(Ch.A.B.C)
69302N/A
DAPI/FITC/TRITC/Cy5N/A405/470/550/635
(Ch.A.B.C.D)
89400N/A
GFP/mCherry59222460/580/
(Ch.B.C)
59222N/A
CFP/YFP59217***435/500
(Ch.A.B)
59217N/A
CFP/YFP/mCherry69308***435/500/580
(Ch.A.B.C)
69308N/A
*pE-300lite will allow vis. Of all 4. pE-300white & pE-300ultra will allow manual and software control of DAvsFIvsTR&Cy5
**Very specific to TxRed/mCherry/Red FISH and but not recomended for TRITC/Cy3 etc..
***Only recommended for stronger YFP signals
****All visable, only independent control of DAPI – others via single source in the pE-340fura
*****All visiable but via same source -so no switching or balancing

Browse by Fluorochrome

Abberior Cage 500

Abberior Cage 532

Abberior Cage 590

Abberior Cage 635

Abberior Flip 565

Abberior Live 510

Abberior Live 515

Abberior Live 580

Abberior rsEGFP

Abberior rsEGFP2

Abberior Star 440SXP

Abberior Star 470SXP

Abberior Star 488

Abberior Star 512

Abberior Star 520SXP

Abberior Star 600

Abberior Star 635

Abberior Star 635p

Abberior Star Red

Acridine Orange + DNA

If workers must detect fluorescence from both RNA and DNA-bound Acridine Orange a longpass set such as 49012 is recommnded. 49011, 39002 may be used with LEDs with CWL 465-495nm; 49002 may be used with 455-485nm CWL LEDs.

Acridine Orange + DNA and RNA

49012 may be used with LEDs with CWL 465-495nm; 19002 may be used with 470-490nm CWL LEDs.

Acridine Orange + RNA

39009 may be used with LEDs with CWL 470-490nm; 49024 may be used with 430-450nm CWL LEDs.

Alexa Fluor 350™

49000 may be used with LEDs with CWL 350-365nm; 39000 may be used with 365-380nm CWL LEDs.

Alexa Fluor 405

49021 may be used with LEDs with CWL 400-410nm.

Alexa Fluor 488™

49011, 39002 may be used with LEDs with CWL 465-495nm; 49002 may be used with 455-485nm CWL LEDs.

Alexa Fluor 514™

49003, 39003 may be used with LEDs with CWL 490-505nm; 49023 may be use with 485-515nm CWL LEDs.

Alexa Fluor 532™

49014 may be used with LEDs with CWL520-540nm.

Alexa Fluor 546™

49004, 49305 may be used with LEDs with CWL 535-555nm; 39004 may be used with 535-550nm CWL LEDs.

Alexa Fluor 555™

49004, 49305 may be used with LEDs with CWL 535-555nm; 39004 may be used with 535-550nm CWL LEDs.

Alexa Fluor 568™

49031 may be used with LEDs with CWL from 560-580nm; 49008, 39010 may be used with 545-575nm LEDs.

Alexa Fluor 594™

49008, 39010 may be used with LEDs with CWL 545-575nm; 49306 may be used with 570-595nm CWL LEDs.

Alexa Fluor 610™

Alexa Fluor 633™

49015 may be used with LEDs with CWL 585-620nm.

Alexa Fluor 647™

49006 may be used with LEDs with CWL 595-640nm; 39007 may be used with 600-635nm CWL LEDs; 49009 may be used with 625-650nm CWL LEDs.

Alexa Fluor 680™

49022 may be used with LEDs with CWL 635-665nm.

Alexa Fluor 700™

49022 may be used with LEDs with CWL 635-665nm.

Alexa Fluor 750™

49007 may be used with LEDs with CWL 685-740nm.

Alexa Fluor 790™

49037 may be used with LEDs with CWL 725-755nm.

Allophycocyanin (APC)

49006 may be used with LEDs with CWL 595-640nm; 39007 may be used with 600-635nm CWL LEDs.

AmCyan

49001, 39001 may be used with LEDs with CWL 430-440nm.

AsRed2

49005, 49305 may be used with LEDs with CWL 535-555nm.

Atto 390

49028 may be used with LEDs with CWL385-405nm.

Atto 425

49013 may be used with LEDs with CWL 435-455nm; 39001 may be used with 430-440nm CWL LEDs.

Atto 465

49002 may be used with LEDs with CWL 455-485nm.

Atto 488

49011, 39002 may be used with LEDs with CWL 470-490nm; 49003 set may be used with 490-505nm LED.

Atto 550

49004, 49305 may be used with LEDs with CWL 535-555nm; 39004 may be used with 535-550nm CWL LEDs.

Atto 633

49015 may be used with LEDs with CWL 585-620nm.

Atto 647N

49006 may be used with LEDs with CWL 595-640nm; 39007 may be used with 600-635nm CWL LEDs; 49009 may be used with 625-650nm CWL LEDs.

Atto 680

49022 may be used with LEDs with CWL 635-665nm.

Auramine

JNO-19008 may be used with LEDs with CWL 435-470nm.

Auramine-rhodamine

19002 may be used with LEDs with CWL 470-490nm.

Azami Green

49002 may be used with LEDs with CWL 455-485nm; 49020 may be used with 475-485nm CWL LEDs; 39002 may be used with 470-490nm CWL LEDs.

BB515

49308 may be used with LEDs with CWL 475-495nm. 49303 may be used with 490-505nm CWL LEDs. 49303 is only recommended when multiplexing with BV480.

BCECF/pH 5.2

BCECF/pH 9.0

Biosearch Blue

49000 may be used with LEDs with CWL 350-365nm; 39000 may be used with 365-380nm CWL LEDs and 49028 may be used with 385-400nm CWL LEDs.

BODIPY FL/pH7.2

49011, 39002 may be used with LEDs with CWL 470-490nm; 49003 set may be used with 490-505nm LED.

Brilliant Violet™ 421

49027 may be used with LEDs with CWL 385-405nm.

Brilliant Violet™ 480

49032, 49302 and 49001 may be used with LEDs with CWL 430-440nm.

Brilliant Violet™ 510

Brilliant Violet™ 570

Brilliant Violet™ 605

Brilliant Violet™ 650

Brilliant Violet™ 711

Brilliant Violet™ 750

Brilliant Violet™ 786

Brilliant™ Ultraviolet 395

Brilliant™ Ultraviolet 496

Brilliant™ Ultraviolet 661

Brilliant™ Ultraviolet 737

Brilliant™ Ultraviolet 805

CAL Fluor® Gold 540

49023 may be use with LEDs with CWL 490-520nm; 49014 may be used with 520-540nm CWL LEDs.

CAL Fluor® Orange 560

49014 may be used with LEDs with CWL520-540nm; 49023 may be use with 490-520nm CWL LEDs.

Contact Us

CAL Fluor® Red 590

49031 may be used with LEDs with CWL from 560-580nm; 49005 may be used with 535-555nm CWL LEDs and 39004 may be used with 535-550nm CWL LEDs

CAL Fluor® Red 610

49306 may be used with LEDs with CWL 570-595nm; 49008, 39010 may be used with 545-575nm CWL LEDs.

CAL Fluor® Red 635

49015 may be used with LEDs with CWL 585-620nm.

Calcein

49011, 39002 may be used with LEDs with CWL 470-490nm; 49003 set may be used with 490-505nm LED.

Calcium Green™-1

49011, 39002 may be used with LEDs with CWL 470-490nm; 49003 set may be used with 490-505nm LED.

Calcofluor White

Calcofluor White is a commonly used stain to detect fungi and yeast and other microorganisms. It is a non-specific stain which preferentially binds to chitin and cellulose in cell walls and as such is also used to visualize plant cells. Calcofluor White has extremely broad excitation/emission spectra, and as a result almost any filter set with UV or violet/blue excitation wavelengths will generate fluorescence emission which may be detected across a very broad range. Some samples will fluoresce strongly in the green wavelengths, others in the blue, and others yellow-orange. Because of this, filter selection is subjective, partly depending on the experience of the microscopist. Our filter sets 19012, 19000, and 19011 may be used successfully depending on the sample and the observer’s preference. 19000 and 19012 may be used with LEDs with CWL 365-380nm; 19011 may be used with 395-410nm CWL LEDs.

Cerulean

49001, 39001 may be used with LEDs with CWL 430-440nm.

CFP

49001, 39001 may be used with LEDs with CWL 430-440nm.

Citrine

49003, 39003 may be used with LEDs with CWL 490-505nm.

Coumarin

49000 may be used with LEDs with CWL 350-365nm; 39000 may be used with 365-380nm CWL LEDs, 19011 may be used with 395-410nm CWL LEDs.

Cy2™

49011, 39002 may be used with LEDs with CWL 470-490nm; 49003 set may be used with 490-505nm LEDs.

Cy3.5™

49031 may be used with LEDs with CWL from 560-580nm; 49008, 39010 may be used with 545-575nm LEDs.

Cy3™

49004, 49005 may be used with LEDs with CWL 535-555nm; 39004 may be used with 535-550nm CWL LEDs.

Cy5.5™

49022 may be used with LEDs with CWL 635-665nm.

Cy5™

49006 may be used with LEDs with CWL 595-640nm; 39007 may be used with 600-635nm CWL LEDs; 49009 may be used with 625-650nm CWL LEDs.

Cy7™

49007 may be used with LEDs with CWL 685-740nm.

DAPI

49000 may be used with LEDs with CWL 350-365nm; 39000 may be used with 365-380nm CWL LEDs, 49028 may be used with 385-400nm CWL LEDs.

Di-8-ANEPPS non-ratiometric

39009 may be used with LEDs with CWL 470-490nm.

Di-8-ANEPPS, ratiometric

This dye and the related dye, Di-4-ANEPPS, are most effectively used as ratiometric indicators of membrane potential. Increases in membrane potential are indicated by a decrease in fluorescence intensity with approx. 440nm excitation and an increase in fluorescence intensity with approx. 530nm excitation. Use of this 71006 filter set requires an external filter wheel to house the 2 excitation filters and to facilitate rapid switching of filters for ratiometric measurements.

DiA

49024 may be used with LEDs with CWL 425-455nm; 39009, 19010 may be used with 470-490nm CWL LEDs.

DiD

49006 may be used with LEDs with CWL 595-640nm; 39007 may be used with 600-635nm CWL LEDs.

DiI

49004, 49305 may be used with LEDs with CWL 535-555nm; 39004 may be used with 535-550nm CWL LEDs.

DiO

49002 may be used with LEDs with CWL 455-485nm; 49020 may be used with 475-485nm CWL LEDs; 39002 may be used with 470-490nm CWL LEDs.

DiR

49007 may be used with LEDs with CWL 685-740nm.

Draq5

49006 may be used with LEDs with CWL 595-640nm; 39007 may be used with 600-635nm CWL LEDs.

DsRed

49004 may be used with LEDs with CWL 535-555nm; 39004 may be used with 535-550nm CWL LEDs.

DyLight 350

49000 may be used with LEDs with CWL 350-365nm; 39000 may be used with 365-380nm CWL LEDs.

DyLight 405

49021 may be used with LEDs with CWL 400-410nm; 19011 may be used with 395-410nm CWL LEDs.

DyLight 488

49011, 39002 may be used with LEDs with CWL 465-495nm; 49002 may be used with 455-485nm CWL LEDs.

DyLight 549

49004, 49305 may be used with LEDs with CWL 535-555nm; 39004 may be used with 535-550nm CWL LEDs.

DyLight 594

49008, 39010 may be used with LEDs with CWL 545-575nm; 49306 may be used with 570-595nm CWL LEDs.

DyLight 633

49015 may be used with LEDs with CWL 585-620nm.

DyLight 649

49006 may be used with LEDs with CWL 595-640nm; 39007 may be used with 600-635nm CWL LEDs; 49009 may be used with 625-650nm CWL LEDs.

DyLight 680

49022 may be used with LEDs with CWL 635-665nm.

DyLight 750

49007 may be used with LEDs with CWL 685-740nm.

DyLight 800

49037 may be used with LEDs with CWL 725-755nm.

EBFP2

49028 may be used with LEDs with CWL 385-400nm, 49021 may be used with 400-410nm CWL LEDs.

ECFP

49001, 39001 may be used with LEDs with CWL 430-440nm.

EGFP

49002 may be used with LEDs with CWL 455-485nm; 49020 may be used with 475-485nm CWL LEDs; 39002 may be used with 470-490nm CWL LEDs.

Emerald GFP

49002 may be used with LEDs with CWL 455-485nm; 49020 may be used with 475-485nm CWL LEDs; 39002 may be used with 470-490nm CWL LEDs.

Eosin

49023 may be used with LEDs with CWL 490-520nm.

Ethidium Bromide

49005 may be used with LEDs with CWL 535-555nm; 39009 may be used with 470-490nm CWL LEDs.

Ethidium homidimer-1/DNA

49005 may be used with LEDs with CWL 535-555nm; 39005 may be used with 535-550nm CWL LEDs.

EYFP/pH 7

49003, 39003 may be used with LEDs with CWL 490-505nm.

FAM

49011, 39002 may be used with LEDs with CWL 465-495nm; 49002 may be used with 455-485nm CWL LEDs.

FITC

49011, 39002 may be used with LEDs with CWL 465-495nm; 49002 may be used with 455-485nm CWL LEDs.

FlAsH-CCPFCC

49003, 39003 may be used with LEDs with CWL 490-505nm.

Fluo-3

49003 may be used with LEDs with CWL 490-505nm; 49011 may be used with 465-495nm CWL LEDs.

Fluo-4

49011, 39002 may be used with LEDs with CWL 465-495nm; 49002 may be used with 455-485nm CWL LEDs.

FluoroGold

This dye has mainly been used as a retrograde neuronal tracer, although it can also distinguish between DNA and RNA binding according to its fluorescence emission. With two excitation peaks at approx. 330nm and 390nm, and two emission peaks at approx. 450nm and 600nm, our DAPI longpass filter sets 49025 and 19012 are appropriate for detection of the fluorescence emission associated with the both peaks, which together appear “gold”. The 49025 set is also useful for distinguishing between FluoroGold bound to DNA or RNA.

FM™ 1-43

39009, 19010 may be used with LEDs with CWL 470-490nm.

FM™ 4-64

For imaging applications using a monochrome camera, this longpass filter set will not distinguish FM 4-64 from TRITC or similar orange/red fluorochromes. To be able to distinguish between FM 4-64 and TRITC or Texas Red-like fluorochromes, contact us for a custom filter set. 19010 may be used with LEDs with CWL 470-490nm; 19006 may be used with 545-575nm CWL LEDs.

Fura Red/Ca2+ – saturated

Fura Red/Ca2+ -free

Fura-2/Ca2+ – free

Fura-2/Ca2+ – saturated

FusionRed

49008, 39010 and 49017 may be used with LEDs with CWL 545-575nm.

GFP

EGFP spectra used here; similar to Emerald GFP, TagGFP, Azami Green, mWasabi, etc.49002 may be used with LEDs with CWL 455-485nm; 49020 may be used with 475-485nm CWL LEDs; 39002 may be used with 470-490nm CWL LEDs.

HEX,SE

49014 may be used with LEDs with CWL520-540nm; 49023 may be use with 485-515nm CWL LEDs.

Hoechst 33258

49000 may be used with LEDs with CWL 350-365nm; 39000 may be used with 365-380nm CWL LEDs.

Indo-1/Ca2+ -free

79006 may be used with LEDs with CWL 365nm.

Indo-1/Ca2+ -saturated

79006 may be used with LEDs with CWL 365nm.

Indocyanine Green

The spectral properties of ICG are strongly dependent on its concentration and the solute it is bound to, so care must be taken by workers to characterize their particular model system. This filter set 49030 is appropriate for most applications involving protein-bound ICG in various physiological media. ICG becomes concentrated in lipid environments, greatly shifting its spectral properties. 49030 may be used with LEDs with CWL 755-795nm.

JC-1 non-ratiometric

JC-1 exists as a monomer at low concentrations and/or low membrane potentials and displays fluorescence ex./em. maxima similar to that of YFP. At higher concentrations and/or higher membrane potentials, JC-1 forms aggregates with a red-shifted emission maxima of 590nm and a broadened excitation spectra. The 49012 longpass filter set will allow detection of JC-1 monomer and aggregate simultaneously. 49012 may be used with LEDs with CWL 465-495nm; 19002 may be used with 470-490nm CWL LEDs.

JC-1 ratiometric

JC-1 exists as a monomer at low concentrations and/or low membrane potentials and displays fluorescence ex./em. maxima similar to that of YFP. At higher concentrations and/or higher membrane potentials, JC-1 forms aggregates with a red-shifted emission maxima of 590nm and a broadened excitation spectra. Use of this 71019 filter set requires an external filter wheel to house the 2 emission filters to facilitate rapid switching of filters for ratiometric measurements.

JOE

49023 may be use with LEDs with CWL 485-515nm.

Killer Red

49008, 39010 may be used with LEDs with CWL 545-575nm; 49306 may be used with 570-595nm CWL LEDs.

Li-Cor IRDye® 680LT

49022 may be used with LEDs with CWL 635-665nm.

Li-Cor IRDye® 800CW

Lucifer Yellow

49026 may be used with LEDs with CWL 390-415nm; 39008 may be used with 405-430nm CWL LEDs.

LysoTracker Blue/MeOH

49028 may be used with LEDs with CWL 385-400nm; 49000 may be used with LEDs with CWL 350-365nm; 39000 may be used with 365-380nm CWL LEDs.

LysoTracker Green/pH 5.2

49002 may be used with LEDs with CWL 455-485nm; 49020 may be used with 475-485nm CWL LEDs; 39002 may be used with 470-490nm CWL LEDs.

LysoTracker Red/pH 5.2

49008 may be used with LEDs with CWL 545-575nm; 49305 may be used with 535-550nm CWL LEDs.

LysoTracker Yellow HCK-123

49023 may be used with LEDs with CWL 485-515nm; 39009 may be use with 470-490nm CWL LEDs.

mCherry

49008, 39010 may be used with LEDs with CWL 545-575nm; 49306 may be used with 570-595nm CWL LEDs.

mCitrine

49003, 39003 may be used with LEDs with CWL 490-505nm; 49023 may be use with 490-520nm CWL LEDs.

MitoTracker Deep Red 633/MeOH

49006 may be used with LEDs with CWL 595-640nm; 39007 may be used with 600-635nm CWL LEDs; 49009 may be used with 625-650nm CWL LEDs.

MitoTracker Green FM/MeOH

49002 may be used with LEDs with CWL 455-485nm; 49011 may be used with 465-495nm CWL LEDs; 39002 may be used with 470-490nm CWL LEDs.

Contact Us

MitoTracker Orange/MeOH

49004, 49305 may be used with LEDs with CWL 535-555nm; 39004 may be used with 535-550nm CWL LEDs.

MitoTracker Red/MeOH

49008, 39010 may be used with LEDs with CWL 545-575nm; 49306 may be used with 570-595nm CWL LEDs.

mKate2

49008, 39010 may be used with LEDs with CWL 545-575nm; 49306 may be used with 570-595nm CWL LEDs.

mKeima Red

49024 may be used with LEDs with CWL 430-450nm.

mKO

49014 may be used with LEDs with CWL 520-540nm; 49010 is not appropriate for use with LEDs because the bandwidth is too narrow.

mOrange2

49014 may be used with LEDs with CWL 520-540nm; 49010 is not appropriate for use with LEDs because the bandwidth is too narrow.

mPlum

49017, 19006 may be used with LEDs with CWL 545-575nm

mRFP1

49008, 39010 may be used with LEDs with CWL 545-575nm; 49306 may be used with 570-595nm CWL LEDs.

mTFP1

49013 may be used with LEDs with CWL 435-455nm.

mWasabi

49002 may be used with LEDs with CWL 455-485nm; 49020 may be used with 475-485nm CWL LEDs; 39002 may be used with 470-490nm CWL LEDs.

NBD X/MeOH

49011 may be used with LEDs with CWL 465-495nm; 19008 may be used with 435-465nm CWL LEDs.

Nile Blue

49006 may be used with LEDs with CWL 595-640nm; 39007 may be used with 600-635nm CWL LEDs.

NirFP

49019 may be used with LEDs with CWL 595-640nm.

Oregon Green™ 488

49011, 39002 may be used with LEDs with CWL 470-490nm; 49003 set may be used with 490-505nm LED.

Oregon Green™ 514

49003, 39003 may be used with LEDs with CWL 490-505nm. 49303 may be used with 490-505nm CWL LEDs.

Pacific Blue

49021 may be used with LEDs with CWL 400-410nm; 19011 may be used with 395-410nm CWL LEDs.

Propidium Iodide

49005 may be used with LEDs with CWL 535-555nm; 39005 may be used with 535-550nm CWL LEDs.

Pulsar™ 650

49024 may be used with LEDs with CWL 430-450nm; 39009, 19010 may be used with 470-490nm CWL LEDs.

Qdot 525

Although the excitation maxima of qdot nanocrystals is in the UV, a broad range of excitation wavelengths may be used.

Qdot 545

Although the excitation maxima of qdot nanocrystals is in the UV, a broad range of excitation wavelengths may be used.

Qdot 565

Although the excitation maxima of qdot nanocrystals is in the UV, a broad range of excitation wavelengths may be used.

Qdot 585

Although the excitation maxima of qdot nanocrystals is in the UV, a broad range of excitation wavelengths may be used.

Qdot 605

Although the excitation maxima of qdot nanocrystals is in the UV, a broad range of excitation wavelengths may be used.

Qdot 625

Although the excitation maxima of qdot nanocrystals is in the UV, a broad range of excitation wavelengths may be used.

Qdot 655

Although the excitation maxima of qdot nanocrystals is in the UV, a broad range of excitation wavelengths may be used.

Qdot 705

Although the excitation maxima of qdot nanocrystals is in the UV, a broad range of excitation wavelengths may be used.

Qdot 800

Although the excitation maxima of qdot nanocrystals is in the UV, a broad range of excitation wavelengths may be used.

Quasar® 570

49014 may be used with LEDs with CWL 520-540nm; 49304 may be used with 540-550nm CWL LEDs.

Quasar® 670

49006 may be used with LEDs with CWL 595-640nm; 39007 may be used with 600-635nm CWL LEDs; 49009 may be used with 625-650nm CWL LEDs.

Quasar® 705

49022 may be used with LEDs with CWL 635-670nm.

R-phycoerythrin

49014 may be used with LEDs with CWL 520-540nm; 19004 may be used with 535-545nm CWL LEDs; 49010 is not appropriate for use with LEDs because the bandwidth is too narrow.

ReAsH-CCPGCC

49008, 39010 may be used with LEDs with CWL 545-575nm; 49306 may be used with 570-595nm CWL LEDs.

Resorufin

49004, 49305 may be used with LEDs with CWL 535-555nm; 39004 may be used with 535-550nm CWL LEDs.

Rhod-2

49004, 49305 may be used with LEDs with CWL 535-555nm; 39004 may be used with 535-550nm CWL LEDs.

Rhodamine 123

49003, 39003 may be used with LEDs with CWL 490-505nm.

Rhodamine 6G

49023 may be use with LEDs with CWL 485-515nm.

Rhodamine Red™-X

49008, 39010 may be used with LEDs with CWL 545-575nm.

ROX

49008, 39010 may be used with LEDs with CWL 545-575nm.

SBFI/Na+ -free

SBFI/Na+ -saturated

SNARF pH 6.0

SNARF pH 9.0

Sulforhodamine 101

49008, 39010 may be used with LEDs with CWL 545-575nm.

SYBR® Green I

49011, 39002 may be used with LEDs with CWL 465-495nm; 49002 may be used with 455-485nm CWL LEDs.

SYTO 9/DNA

49011, 39002 may be used with LEDs with CWL 465-495nm; 49002 may be used with 455-485nm CWL LEDs.

SYTO® 60

49006 may be used with LEDs with CWL 595-640nm; 39007 may be used with 600-635nm CWL LEDs; 49009 may be used with 625-650nm CWL LEDs.

T-Sapphire

TagBFP

49021 may be used with 400-410nm CWL LEDs, 49028 may be used with 385-400nm CWL LEDs.

TagRFP

49004, 49305 may be used with LEDs with CWL 535-555nm; 39004 may be used with 535-550nm CWL LEDs.

TAMRA

49004, 49305 may be used with LEDs with CWL 535-555nm; 39004 may be used with 535-550nm CWL LEDs.

tdTomato

49004, 49305 may be used with LEDs with CWL 535-555nm; 39004 may be used with 535-550nm CWL LEDs.

TET

49023 may be used with LEDs with CWL 485-515nm.

Tetracycline

Tetramethylrhodamine isothiocyanate

49004, 49305 may be used with LEDs with CWL 535-555nm; 39004 may be used with 535-550nm CWL LEDs.

Texas Red®

49008, 39010 may be used with LEDs with CWL 545-575nm; 49306 may be used with 570-595nm CWL LEDs.

Texas Red®-X

49008, 39010 may be used with LEDs with CWL 545-575nm; 49306 may be used with 570-595nm CWL LEDs.

TO-PRO™-3

49006 may be used with LEDs with CWL 595-640nm; 39007 may be used with 600-635nm CWL LEDs; 49009 may be used with 625-650nm CWL LEDs.

Topaz

49003, 39003 may be used with LEDs with CWL 490-505nm.

TRITC

49004, 49305 may be used with LEDs with CWL 535-555nm; 39004 may be used with 535-550nm CWL LEDs.

TurboFP650

49008, 49017 and 19006 may be used with LEDs with CWL 545-575nm.

wtGFP

19008 may be used with LEDs with CWL 435-470nm; 49002 may be used with 455-485nm CWL LEDs

XTop

X-rhod-1/Ca2+

49008, 39010 may be used with LEDs with CWL 545-575nm; 49306 may be used with 570-595nm CWL LEDs.

ZsGreen1

49002 may be used with LEDs with CWL 455-485nm; 49020 may be used with 475-485nm CWL LEDs; 39002 may be used with 470-490nm CWL LEDs.

ZsYellow

49023 may be use with LEDs with CWL 485-515nm; 49003 set may be used with 490-505nm LED.

JNO-Qdot625

– Filter set for Qdot625
– Chroma Filter Model No. : 39106

SpectraViewer – Qdot625
SpectraViewer - Qdot625
SpectraViewer – Qdot625
JNO-Qdot625
JNO-Qdot625
Chroma Model No. 39106
Filters in this SetType
AT425/50x EX
AT485DCBS
AT625/30mEM
JNO-Qdot625

상기 필터를 구매하시기 전에, Excitation 영역에서 사용하시는 광원이 충분한 광량을 가지고 있는지 확인을 하셔야 하고, Emission영역이 가시광선 대역을 벗어나는 경우에는 검출장치(카메라)가 대응 가능한 영역인지 확인이 필요합니다.


현미경의 종류에 따라 Filter의 Size가 다르고, 같이 사용되어 지는 Cube의 종류가 다양하기 때문에, 구매시에는 반드시 판매 담당자와 충분한 확인을 하실 필요가 있습니다.

E-mail : jhjin@jnoptic.com 
Mobile : + 82-2-3473-4188~9

Mycobacterium tuberculosis

결핵 검진을 위한 형광현미경 검경법

Auramine O나 Auramine-rhodamine을 이용한 염색법으로 20x 또는 40x 대물렌즈로 관찰 한다 (접안렌즈 기준 200배 또는 400배). 이러한 형광염색은 Ziehl-Neelsen (ZN) 염색에 비해 민감도가 10% 높아서 관찰량이 많은 사용자에게 적합합니다.

Filter Set for Auramine ( Longpass Type )

Model No. JNO-19008

Ex: 425~475 ㎚, Dm: 485 ㎚, Em: 495 ㎚~

Standard Filter for Fluorescence

현미경에 사용되는 기본 형광필터 세트

형광시약에 폭넓게 대응이 되는 기본 형광 필터 세트
– U, G, B Excitation(자극)
– Long-Pass & Band-Pass Emission

기본 형광 필터 세트              – Best Selling Product –
Standard Fluorescence Filter Cube Set for Microscope
Standard Fluorescence Filter Cube Set, Band Pass type
JNO-U(B),   JNO-B(B),   JNO-G(B) – Made by JNOPTIC
Chroma Filter Model No. 39000, 39002, 39004

기본 형광 필터 세트의 세부정보는 제품의 모델명을 클릭하시면 확인하실수 있습니다.

DAPI Filter Set : JNO-U(B)

  • JNO-U(B) filter set induces the light of the UV wavelength range to the sample and leads the generated fluorescence to the observation system.
  • UV excitation (Bandpass Emission)
  • EX : 361~389㎚, BS : 415㎚, EM : 435~485㎚
  • Chroma filter 모델 No. 로 확인 시 39000 참고
DAPI VS JNO-U(B)
DAPI VS JNO-U(B)

DAPI Filter Set : JNO-U(L)

  • JNO-U(L) filter set induces the light of the UV wavelength range to the sample and leads the generated fluorescence to the observation system.
  • UV excitation (Longpass Emission)
  • EX : 361~389㎚, BS : 415㎚, EM : 435㎚ ~
  • Chroma filter 모델 No. 로 확인 시 19000 참고
DAPI VS JNO-U(L)
DAPI VS JNO-U(L)

FITC Filter Set : JNO-B(B)

  • JNO-B(B) filter set induces the light of the Blue wavelength range to the sample and leads the generated fluorescence to the observation system.
  • Blue excitation (Bandpass Emission)
  • EX : 465~495㎚, BS : 505㎚ EM : 515~555㎚
  • Chroma filter 모델 No. 로 확인 시 39002 참고
FITC VS JNO-B(B)
FITC VS JNO-B(B)

FITC Filter Set : JNO-B(L)

  • JNO-B(L) filter set induces the light of the Blue wavelength range to the sample and leads the generated fluorescence to the observation system.
  • Blue excitation (Longpass Emission)
  • 465~495㎚, BS : 505㎚, EM : 515㎚ ~
  • Chroma filter 모델 No. 로 확인 시 19002 참고
FITC VS JNO-B(L)
FITC VS JNO-B(L)

TRITC Filter Set : JNO-G(B)

  • JNO-G(B) filter set iduces the light of the Green wavelength range to the sample and leads the generated fluorescence to the observation system.
  • Green excitation (Bandpass Emission)
  • EX : 527~553㎚, BS : 565㎚, EM : 577~633㎚
  • Chroma filter 모델 No. 로 확인 시 39004 참고
TRITC VS JNO-G(B)
TRITC VS JNO-G(B)

TRITC Filter Set : JNO-G(L)

  • JNO-G(L) filter set iduces the light of the Green wavelength range to the sample and leads the generated fluorescence to the observation system.
  • Green excitation (Longpass Emission)
  • EX : 527~553㎚, BS : 565㎚, EM : 575㎚ ~
  • Chroma filter 모델 No. 로 확인 시 19004 참고
TRITC VS JNO-G(L)
TRITC VS JNO-G(L)

AlexaFluor 594 Filter Set : JNO-R1(B)

  • JNO-R1(B) filter set induces the light of the certain wavelength range to the sample and leads the generated fluorescence to the observation system.
  • Mirror unit for fluorescence microscopy (Bandpass Emission)
  • EX : 540~580㎚, BS : 600㎚, EM : 605~665㎚
  • Chroma filter 모델 No. 로 확인 시 39010 참고
Alexa Fluor 594 VS JNO-R1(B)
Alexa Fluor 594 VS JNO-R1(B)

Cy5 Filter Set : JNO-R2(B)

  • JNO-R2(B) filter set induces the light of the certain wavelength range to the sample and leads the generated fluorescence to the observation system.
  • Mirror unit for fluorescence microscopy (Bandpass Emission)
  • EX : 595~645㎚, BS : 655㎚, EM : 665~715㎚
  • Chroma filter 모델 No. 로 확인 시 39007 참고
Cy5 VS JNO-R2(B)
Cy5 VS JNO-R2(B)

Industrial Filters

UV FILTER ( 자외선 투과 필터 )

270 ㎚ 투과필터 ( 263 ~ 277 ㎚ ) 350 ㎚ 투과필터( 325 ~ 375 ㎚ )

NIR FILTER ( 근적외선 필터 )

780 ㎚ 이상 투과필터 ( 780 ㎚ ~ ) 밴드투과 필터 ( 771 ~ 851 ㎚ )

Near Infrared Camera
근적외선 관찰 카메라

AcquCAM 23GR2

칼라 카메라


– 근적외선 대응 –
Color Camera

UV 자극을 이용한 형광 이미지 _ DAPI
AcquCAM 23S2

흑백 카메라

– 근적외선 대응 –
Monochrome Camera ( IR-DIC Image )

적외선을 이용한 미분 간섭 관찰 이미지

Optical Filters

JN-optical filter
Single Bandpass &  Single Edge Filters

JN-optical filter
Multi Bandpass & Multi Dichroic Filters

JN-optical filter for fluorescence
Fluorescence Applications

JN-optical filter for fluorescence
Additional Applications

상기 이미지 하단의 텍스트를 클릭하시면, 본사 홈페이지의 상세 자료를 확인하실 수 있습니다. ( Chroma Technology Corporation)