기공율(공극율) 분석 프로그램 JNO-IX
기공률분석, 공극률 분석, Particle Analysis, Porosity Analysis
다공성재료에서 비어있는 부분이 차지하는 비율을 자동으로 계산합니다
모든 기공의 면적을 측정하여 일정 구간에 대한 통계를 자동으로 산출
샘플 이미지를 보내주시면 테스트 가능합니다. jhjin@jnoptic.com
자세한 문의 사항은 02-3473-4188
기공율(공극율) 분석 프로그램 JNO-IX
기공률분석, 공극률 분석, Particle Analysis, Porosity Analysis
다공성재료에서 비어있는 부분이 차지하는 비율을 자동으로 계산합니다
모든 기공의 면적을 측정하여 일정 구간에 대한 통계를 자동으로 산출
샘플 이미지를 보내주시면 테스트 가능합니다. jhjin@jnoptic.com
자세한 문의 사항은 02-3473-4188
이미지 분석의 정석
미국 Media cybernetics 社 전문가용 이미지 분석 전문 프로그램
2D Image Analysis Software ImageProPlus7.0
2D/3D/4D Image Analysis Software ImageProPlus 10.0
Image Pro Plus 설치, 교육 전문 기업
ImageProPlus 에 대해 궁금하신 사항 연락 바랍니다
02-3473-4188
관찰하는 샘플의 전체 Field of View에서 밝고 균일 한 조명을 구현하기 위해서 사용되는 일반적인 조명 방법입니다. ( Köhler illumination )
조명 광원이 광학계의 내부에서 결상을 하게 되어 있습니다. 예전에 사용되었던 크리티컬 조명에서는 샘플의 상에 조명광원의 필라멘트 상이 겹쳐서 보이게 됩니다만, 쾰러 조명은 조명의 결상 위치를 무한보정 대물렌즈의 후초점면에 위치하도록 유도함으로서 샘플의 상에 광원의 상이 중복되는 문제점을 해결 하면서, 동시에 샘플 전체에 균일한 조명을 조사하는 것이 가능해 졌습니다.
현미경의 모든 관찰법은 상기와 같은 쾰러 조명을 기반으로 설계되어 있습니다. 따라서 쾰러 조명의 세팅 또는 설정이 틀어져 있는 상태에서의 현미경의 관찰은 그 설계 목적을 완전히 벗어나 있는 현미경 관찰을 하게 되는 것이며, 사용중이라고 생각하는 본래의 관찰법과는 상이한 알 수 없는 관찰법으로 샘플을 관찰 하는 비효율적인 경우가 빈번하게 발생되고 있습니다.
쾰러 조명에 대한 명칭을 생소하시게 느껴지신다면, 독자께서는 지금까지 현미경의 중요한 포인트를 제대로 알지 못하고 사용하시고 계셨을 가능성이 있습니다 . 바이오 이미징을 하시는 관찰자께서는 사용하시는 현미경의 쾰러 조명 설정이 제대로 되어있는지 반드시 확인하실 필요가 있습니다.
다만, 반사용 현미경을 주로 사용하시는 산업계 현미경 사용자 분들은 이러한 쾰러 조명의 잘못된 설정으로 받는 영향이 상대적으로는 적습니다. 그 이유로는 반사관찰을 위주로 하는 현미경에서는 대물렌즈 자체가 콘덴서 역할을 하기 때문에 쾰러 조명을 설정하기 위해서 콘덴서 위치 교정이 따로 필요하기 않기 때문입니다.
반사형 조명을 사용하는 현미경에서는 샘플에 초점을 맞추면, 그 자체로 콘덴서의 높이 설정이 완료되고 ( X, Y, Z축 위치 설정 ), Field 조리개(diaphragm)와 Aperture 조리개(diaphragm)의 설정(XY축 교정)이 상대적으로 변경되기 어려운 구조를 가지고 있기 때문에 입니다.
KÖHLER ILLUMINATION은 현미경 광 경로 상에 2개의 결상계가 서로 결상 되지 않는 영역을 상보적으로 사용하도록 설계되어 있다.
첫째로는 샘플의 상이 형성되는 이미징용 결상계
두번째로는 조명 광원의 상이 형성되는 결상계
흑연 구상화율(주철분석) 측정 프로그램 JNO-IXM-Cast Iron
연마(폴리싱)된 샘플을 현미경으로 확대하여 영상화한 이미지를 가지고 구상화율을 보다 쉽게 구하실수 있습니다.
현미경 영상 획득및 이미지 캡쳐 , 기본적인 길이 면적 각도등의 측정, 파티클 카운트 , 상분석( 페라이트 펄라이트 측정) 등의 기능을 기본적으로 포함하고 있습니다.
주철 조직을 다양한 규격 하에서 분석할 수 있는 도구를 제공합니다.
규격은 프로그램내에서 설정 가능 합니다. KS D 4302:2011 KS D 4302:2006 ASTM A 247-06 ASTM E 2567-11 ISO 945-1:2008 ISO 16112:2006 JIG G 5502-2001 |
자세한 문의 사항은 02-3473-4188 연락 바랍니다 .
아래 내용은 규격에 따른 측정 결과입니다.
2. KS D 4302:2006
3. ASTM A 247-06
4. ASTM E 2567-11
5. ISO 945-1:2008
6. ISO 16112:2006
7. JIS G 5502-2001
Compare filter sets by selecting the recommended/alternative set listed for each fluorochrome below.
하단의 Fluorochrome 이름을 클릭하시면
대응되는 형광필터의 조합을 확인 하실 수 있습니다.
Alexa Fluor 594 dye is a bright, red-fluorescent dye that can be excited using the 561 nm or 594 nm laser lines. For stable signal generation in imaging and flow cytometry, Alexa Fluor 594 dye is pH-insensitive over a wide molar range.
Cyan Fluorescent Protein (CFP) is a versatile biological marker for monitoring physiological processes, visualizing protein localization, and detecting transgenic expression in vivo. CFP can be excited by the 405 nm laser line and is optimally detected at 485 nm.
Cy5 dye is a bright, far-red-fluorescent dye that can be excited using the 633 or 647 nm laser lines, and visualized Cy5 filter sets. In addition to immunocytochemistry applications, Cy5 is also commonly used to label nucleic acids.
A variety of cyanine 5.5 (Cy5.5) dyes has been used to label biological molecules for fluorescence imaging and other fluorescence-based biochemical analysis. They are widely used for labeling peptides, proteins and oligos etc. Cy5.5 dyes are one type of the most common red fluorophores.
Cy7 is a near-IR fluor that is invisible to the naked eye (Excitation/emission maximum 750/776 nm). It is used in in vivo imaging applications, as well as the Cy7.5 dye.
DAPI (4′,6-diamidino-2-phenylindole) is a fluorescent stain that binds strongly to A-T rich regions in DNA. It is used extensively in fluorescence microscopy. As DAPI can pass through an intact cell membrane, it can be used to stain both live and fixed cells, though it passes through the membrane less efficiently in live cells and therefore the effectiveness of the stain is lower.
Fluorescein isothiocyanate (FITC) is a derivative of fluorescein used in wide-ranging applications including flow cytometry. FITC is the original fluoresce in molecule functionalized with an isothiocyanate reactive group (-N=C=S), replacing a hydrogen atom on the bottom ring of the structure. This derivative is reactive towards nucleophiles including amine and sulfhydryl groups on proteins.
The green fluorescent protein (GFP) is a protein composed of 238 amino acid residues (26.9 kDa) that exhibits bright green fluorescence when exposed to light in the blue to ultraviolet range. Although many other marine organisms have similar green fluorescent proteins, GFP traditionally refers to the protein first isolated from the jellyfish Aequorea victoria. The GFP from A. victoria has a major excitation peak at a wavelength of 395 nm and a minor one at 475 nm. Its emission peak is at 509 nm, which is in the lower green portion of the visible spectrum.
tdTomato is a genetic fusion of two copies of the dTomato gene (2) which was specifi cally designed for low aggregation (1). Its tandem dimer structure plays an important role in the exceptional brightness of tdTomato (Table I). Its excitation and emission maxima occur at 554 nm and 581 nm, respectively (1). Because tdTomato forms an intramolecular dimer, it behaves like a monomer, and has been used successfully for N- and C- terminal fusions. It shows excellent photostability and its half-time (t0.5) for maturation is one hour at 37°C.
Tetramethylrhodamine (TRITC) is a bright orange-fluorescent dye with excitation ideally suited to the 532 nm laser line. It is commonly conjugated to antibodies and proteins for cellular imaging applications.
Polarization Microscopy
19세기 중순 경 개발되어짐.
초기에는 암석과 광물의 연구에 주로 사용되어졌으나, 점차로 그 용도가 넓어져서 의약품, 공업제품 등 산업 전반에 걸쳐 이용분야가 확대 됨.
샘플의 광학적 성질을 조사하고,이를 통하여 샘플을 구성하는 물질이 무엇으로 이루어졌는지 동정 하기 위해 사용 됨.
: 샘플에 빛이 통과 할때 어떠한 방향으로 빛이 진행하더라도 모든 방향에 대하여 동일한 광학적 영향을 준다.(복굴절 하지 않는다.)
예: 유리 등
: 샘플에 빛이 통과 할때 빛이 진행하는 방향(각도)에 따라 다양한 복굴절을 한다.
: 빛이 진행 할 때 복굴절하지 않는 광축을 하나만 가지고 있다.
예: 방해석, 석영 등
: 빛이 진행 할 때 복굴절하지 않는 광축을 두개 가지고 있다.
예: 운모, 장석, 각섬석, 휘석, 감람석 등
(OLYMPUS – 32BP775)
제품소개
TOMORO ScopeEye Auto는 기존의 TOMORO ScopeEye에 자동 입도 분석 (Particle analysis) 기능이 추가된 범용 영상 분석 소프트웨어 입니다.
TOMORO ScopeEYe Auto는 기존의 불편한 입도 분석 (Particle analysis) 절차를 단순화 시켰음에도 더욱 자세한 분석 결과를 도출 할 수 있도록 설계되었습니다.
TOMORO ScopeEye Auto로 기존에 불가능했던 강력한 입도 분석(Particel analysis)을 경험해 보십시오.
Segmentation Method
* 30여가지의 Measure Items
* 개별적인 개체들에 대한 측정 아이템의 추가 삭제 가능
* 항목 선택에 관련한 사용자 지정값의 저장 및 불러오기 기능
* 특성에 따라 그룹화된 측정 아이템
■ Color Picker를 이용한 Segmentation
아래의 도구를 이용하여 향상된 영상 분할을 수행.
*Color Picker
*Magicwand
*Select Object
*Select Total Object
*Set from Histogram
■ Histogram을 이용한 Segmentation(영상 분할)
*Histogram Zoom control
*Low / High Bound control을 이용한 수동 구간선택.
*Low / High Bound display : 스핀 컨트롤을 이용한 미세 조정
*자동 Dark / Bright 영역검출
*선택된 영역에 대해 segmentation(영상 분할) 을 수행합니다.
■ CP Edition
* 선택된 객체의 간편한 분할 및 결합 기능
Measure Items
■ General
■ Diameter
■ Radius
■ MER
■ Global Analysis